When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part # 75556 on a 2013 Chevy Captiva Sport the measurement from the center of the hitch pin hole to the closest part of the bumper was 6-1/2". The measurement from the center of the hitch pin hole to the closest part of the Ecotric Electric Wheelchair Carrier would need to be more than 6-1/2" to fit the hitch.
If it measures shorter than that you can use Hitch Extender For 2" Trailer Hitch Receiver 7" part #... view full answer...
I checked with my Roadmaster representative, who tells me that the Roadmaster Bulb and Socket Wiring Kit, part # is indeed a fit for your 2012 Chevy Captiva Sport.
The taillight assembly needs to be at least 2-1/4 or 2-1/2 inches deep, to allow for the 2 inch length of the bulb plus the recommended 1/4 to 1/2 inch of clearance between the bulb and the inside of the lens.
I've linked you to a video showing the kit being installed on a 2012 Chevy Sonic. view full answer...
Yes, your 2012 Chevrolet Captiva Sport can be flat towed with all 4 wheels down. In order to do so, you will need a few components such as a base plate kit, tow bar, supplemental braking system, wiring harness, safety cables, and possible high-low adapter. I have attached my recommendations for the following items below:
For a base plate kit designed to work with your vehicle, I recommend using the Blue Ox Base Plate Kit part # BX3332 as it has a removable arm feature for a more aesthetically... view full answer...
Yes! The Malone AirFlow roof rack # MPG215 is indeed a fit for a 2013 Chevy Captiva Sport with factor side rails that run front to back on the roof. I have linked a video review of this roof rack for you. view full answer...
I checked with Curt and trailer wiring harness # C56257 will fit your 2015 Chevy Captiva Sport LTZ. It is listed as a fit for all models of the 2015 Captiva Sport. I have included a link to the installation instructions for you as well. view full answer...
The brake assemblies you mentioned match up with an Al KO 12k axle which means the replacement oil cap part # K71-859-00 would be the correct replacement. view full answer...
I can assure you that the Draw Tite hitch part # 75556 does fit your 2015 Chevy Captiva Sport. I attached an install video link down below the product links that show this hitch installed on a 2015 Captiva Sport just like yours for you to check out and see that it is compatible. I also attached a picture of the hitch installed on a 2015 model just like yours as well.
If you really want the dimensions I can get them, but as far as proof the hitch fits the video and picture should be much... view full answer...
For a 2014 Chevrolet Captiva Sport, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75556. The Draw-Tite Max-Frame is a Class III trailer hitch with a 2" receiver tube opening. The hitch is rated for 400 lbs tongue weight (TW) and 4,000 lbs gross trailer weight (GTW). I have attached a review video of this hitch installed on a similar 2013 Chevrolet Captiva Sport for you as well.
For a trailer wiring harness, I recommend using the Hopkins Plug-In Simple Vehicle Wiring... view full answer...
The only 3 bike trunk mount carrier I found to fit your 2013 Chevrolet Captiva Sport is the Hollywood Racks Over-The-Top 3 Bike Carrier # HRF2-3. This trunk mount bike rack is designed to work with SUVs and hatchbacks. This bike rack features anti-sway cradles to prevent bike-to-bike and bike- to-vehicle contact. The foam pads on the base of the rack help to protect your car. I have attached a review video of this carrier's 2 bike version for you.
If you are looking for a bike rack that... view full answer...
Go To Results